DPP 260 K2 Blister Packing Machine

  • TYPE: DPP 260 K2
  • Heating plate in forming station can auto open and close.
  • When the forming material did not reach set temperature the machine will automatically delay the start of machine, to reduce waste of material.
  • Adopting the contacting heating type, lower the heating power saves energy meanwhile lower the temperature strengthen the stability of formed blister.
  • Sealing with pneumatic cushion: the cylinder lift up the upper sealing moulds (web plate) when machine stops which avoids deformation of the blister bubbles caused by the heat radiation during the stop, meanwhile serves a buffer against the excess pressure and thus extends the life span of machine.
  • All the parts including feeding hopper which will contact with material are all made from SS 316.
  • This machine also serves emergency stop mechanism, alarm and auto stop when run out of PVC and broken PVC.
Max. Punch Speed: AL/PL:60 times/min(stand type)
AL/AL:40 times/min
Max. Production Capacity: AL/PL:350 thous.Pes/h
AL/AL: 150 thous.Pes/h
Adjustable range of stroke: Standard dispose≤120mm(according to the customers′Requirement)
Max. Forming Area: 245x112mm
Max. Forming Depth: AL/PL:14mm
Specification of packaging material: Note:the width of the material 130-260mm Medicine PVC:260×0.25(0.15-0.5)mm
Heat-sealing PTP:260×0.02mm
Total Power: 6.4KW
Main Motor Power: 2.2KW
Forming Upper and Lower Heat power: 1.5KW(x2)
Heat-sealing Heat Power: 1.2KW
Air Pump(Air Compressor)Volume: ≥0.38m3/min
Dimensions of overall machine(L×W×H) : 3940x720x1580mm
Dimensions of packing case(L×W×H): 4100x880x1740mm
Weight: 1800kg